Runner RST Purejet
Characteristic
Axial clearance with warm crankcase
0.10 ÷ 0.12 mm
Axial clearance with cold crankcase
0.06 to 0.08 mm
Limit value with cold crankcase
0.02 ÷ 0.03 mm
Air compressor
Removal
Removing air compressor
- Remove the throttle body manifold
- Remove the air piping union from the injection
head using a Torx 25mm wrench
- Remove the air piping support bracket fixing
screw from the transmission covers.
- Remove the 4 screws fixing the air compressor
to the crankcase, as shown in the figure.
- Remove the air compressor
Engine
ENG - 35