Active Diagnostics - Gilera Runner RSTPurejet Service Manual

Table of Contents

Advertisement

Runner RST Purejet
This function displays the parameters stored previously. As already specified in the description of the
parameter function, parameters are stored by pressing the «TAB» key at the selected time.
The diagnostic tester can contain a single memorisation.
It is cancelled out automatically as soon as power is disconnected from the tester.
Error clearing
This function clears any faults and settings recorded by the ECU auto-diagnostic function.
Active diagnosis
This function is very useful for making an efficiency check of the main components of the system and
related circuits.
The components involved are:
Specification
AIR INJECTOR
FUEL INJECTOR
HV COIL
FUEL PUMP
TEMPERATURE INDICATOR
CHECK LAMP
ODOMETER
CONSUMPTION GAUGE
When the various diagnostics are enabled, the tester displays its results «ENDED SUCCESSFULLY»
or «FAILED».
The tester results must always be combined with sound or visual checks.
The tester can confirm transmission of the command but cannot check the actual power supply or
efficiency of the circuit under testing.
Resetting the TPS
This function allows combining the throttle body with the ECU.
Calibration
This function makes it possible to insert new calibrations to the ECU with the product developments.
ECU information
The tester displays the following information:
- N. SER. = ECU serial number
- HW REV = Hardware revision N°
- ECU SW = ECU software reference
- CALIBR = Calibration reference

ACTIVE DIAGNOSTICS

Wait for the sound confirming 5 openings
Wait for the sound confirming 5 openings
Wait for the sound confirming 5 coil magnetic ac-
Wait for the sound confirming the pump rotation for
The indicator increases to display an average tem-
perature, then returns to the rest position (to per-
The light is normally on. The diagnostic is con-
firmed when the light turns off briefly.
Instrument not present on the vehicle
Instrument not present on the vehicle
pure jet injection
Desc./Quantity
tivity (weak signal)
approx. 30 seconds.
form with cold engine)
INJ PJ - 11

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Runner rst purejet

Table of Contents