Transmissions; Transmission Adjustment - Gilera Runner RSTPurejet Service Manual

Runner RST Purejet

transmissions

After mounting the transmissions, check that they
move perfectly within the sheath.
- Lubricate the cable with the recommended prod-
uct, applying a plastic bag as shown in the picture.
- If the cable does not move perfectly due to pos-
sible fraying replace both the cable and the sheath.
Recommended products
AGIP CITY HI TEC 4T Oil for flexible transmis-
sion lubrication (acceleration control, mixer
and odometer)
Synthetic oil that passes SAE 5W-40, API SL,
ACEA A3, JASO MA specifications
Grease the ends of the cable.

Transmission adjustment

Set the command cables:
Mix cable: see the following procedure "Mixer Timing".
Gas cable: adjust so there is no play in the sheathes.
Splitter command cable: adjust so there is no play in the gas knob.
All transmissions must be regulated so there is no play in the sheathes.
Maintenance
MAIN - 7