Front Suspension; Front Brake; Rear Brake; Engine Assembly - Gilera Runner RSTPurejet Service Manual

Characteristics
Name
Frame - swing arm bolt *
Shock-absorber - frame nut *
Shock-absorber - engine bolt *
Wheel axle pin*
Stand pin
Stand screws
*: safety torque
Name
Fork nut *
Fork screw
Front wheel axle *
*: safety torque
Name
Brake fluid pump - hose fitting
Brake fluid pipe-calliper fitting
Support calliper tightening screw*
Front disc tightening screw*
Oil bleed screw
*: safety torque
Name
Calliper tightening screw
Brake fluid tube- calliper
Brake fluid pump - hose fitting
Disc tightening screw
Rear wheel axle
Rear wheel hub screw
Oil bleed screw
N.B.
IN ORDER TO ENSURE AN ADEQUATE LOCKING TORQUE, LUBRICATE THE NUTS BEFORE
ASSEMBLING THEM.
Name
Head tightening nut
Coolant bleed screw
Temperature sensor
Temperature sensor at the ECU
Crankcase closure screw
Transmission cover closing screw
Pick-up screw
Stator screw
Suction connection screw
Starter screw
Mixer screw
Rear hub cap screw
Driving pulley nut
CHAR - 6

FRONT SUSPENSION

FRONT BRAKE

REAR BRAKE

ENGINE ASSEMBLY

Runner RST Purejet
Torque in Nm
33 ÷ 41
20 ÷ 25
33 ÷ 41
100 ÷ 125
18.5 ÷ 19
18.5 ÷ 19
Torque in Nm
20 ÷ 25
20 ÷ 25
45 ÷ 50
Torque in Nm
13 to 18 Nm
20 ÷ 25
20 ÷ 25
12 ÷ 15
7 to 10 Nm
Torque in Nm
20 ÷ 25
13 ÷ 18
13 to 18 Nm
6 ÷ 6.5
100 ÷ 125
20 ÷ 25
7 to 10 Nm
Torque in Nm
10 ÷ 11
1 ÷ 2
6 ÷ 8
18 ÷ 22
12 ÷ 13
12 ÷ 13
3 ÷ 4
3 ÷ 4
7 ÷ 8
12 ÷ 13
3 ÷ 5
12 ÷ 13
40÷ 44*