Helmet Bay; Fuel Tank - Gilera Stalker 50 Service Manual

Chassis

Helmet bay

•
Remove the saddle.
•
Remove the central cover.
•
Remove the side panels
•
Remove the battery and pull out the fu-
seholder from its seat.
•
Remove the fuel tank cap and the oil
tank cap.
•
Remove the five screws and pull off the
helmet compartment.
For installation, reverse the removal sequence.

Fuel tank

•
Remove the side panels
•
Remove the rear mudguard.
•
Disconnect the fuel hose and the vac-
uum hose for the fuel valve.
•
Disconnect the electric cable harness
of the fuel gauge.
•
Remove the three screws indicated in
the figure and the tank down from the
chassis.
CHAS - 114
Stalker 50