Front Light Group - Gilera NEXUS 300 i.e. Owner's Manual

Front light group (03_23, 03_24, 03_25, 03_26, 03_27)

To access the bulbs, proceed as follows:
1. Remove the Gilera badge with a plain slot screwdriver.
2. Remove the front shield connection unscrewing the two screws «A».
3. Remove the four screws "B".
4. Remove the screws «C» on the expansion tank compartment cover and the glove-
box compartment.
03_23
5. Take the headlight assembly off its housing.
To reassemble, repeat the operation in the reverse order.
Remove the rubber protection to take out the high/low-beam bulbs.
03_24
03_25
62