Removing The Door Switch - Whirlpool LHW0050PQ Service Manual

WARNING
Electrical Shock Hazard
Disconnect power before servicing.
Replace all parts and panels before
operating.
Failure to do so can result in death or
electrical shock.
1. Unplug washer or disconnect power.
2. Turn off the water supply to the washer.
3. Remove the top cover from the washer
(see page 4-2 for the procedure).
4. Open the washer door.
5. Remove the two flat-head screws from the
door switch.
Door
Switch
Screws

REMOVING THE DOOR SWITCH

6. Remove the door switch from behind the
front panel, then remove the two flat-head
screws from the door switch bracket, and
remove the bracket from the switch.
7. Cut the wire tie, and disconnect the three
wire connectors from the switch terminals.
Mounting
Bracket
Screws
Black
4-10
Door Switch Wire Tie
2 Red
Brown