Disconnect power before servicing.
Replace all parts and panels before operating.
Failure to do so can result in death or electrical shock.
THERMOSTAT
Refer to page 4-17 for the procedure for servic-
ing the thermostat.
1.
Unplug washer or disconnect power.
WARNING
Electrical Shock Hazard
2.
Disconnect the wire connectors from the
thermostat terminals.
3.
Set the ohmmeter to the R x 1 scale.
4.
Touch the ohmmeter test leads to the ther-
mostat connector pins. The meter should
indicate a closed circuit (0 Ω).
5-6