Drain Pump; Heating Element - Whirlpool LHW0050PQ Service Manual

Disconnect power before servicing.
Replace all parts and panels before operating.
Failure to do so can result in death or electrical shock.

DRAIN PUMP

Refer to page 4-13 for the procedure for servic-
ing the drain pump.
1. Unplug washer or disconnect power.
2. Disconnect the wire connectors from the
drain pump terminals.
3. Set the ohmmeter to the R x 1 scale.
4. Touch the ohmmeter test leads to the
drain pump connector pins. The meter
should indicate between 18 and 30 Ω.
WARNING
Electrical Shock Hazard

HEATING ELEMENT

Refer to page 4-15 for the procedure for servic-
ing the heating element.
1. Unplug washer or disconnect power.
2. Disconnect the wire connectors from the
heating element terminals.
3. Set the ohmmeter to the R x 1 scale.
4. Touch the ohmmeter test leads to the
heating element connector pins. The meter
should indicate between 8 and 18 Ω.
5-4