Status Leds - Black Box LWN602A User Manual

Rollover cable with
RJ-5 connectors
RJ-45-to-Female DB9 adapter
Figure 3-7. Wiring details for making a serial cable with an RJ-45-to-female DB9 adapter.
Table 3-6. Wiring details for making a serial cable with an RJ-45-to-female DB9 adapter.
Console Port
(LWN602HA)
Signal
RTS (Request to Send)
DTR (Data Terminal Ready)
TXD (Transmitted Data)
Ground
Ground
RXD (Received Data)
DSR (Data Set Ready)
CTS (Clear to Send)
—

3.3 Status LEDs

The five status LEDs on the top of the SmartPath AP indicate various states of activity through their color (dark, green, amber, and
red) and illumination patterns (steady glow or pulsing).
Power
• Dark: No power
• Steady green: Powered on and the firmware is running normally
• Pulsing green: Firmware is booting up
• Steady amber: Firmware is being updated
• Pulsing amber: Alarm indicating a firmware issue has occurred
• Steady red: Alarm indicating a hardware issue has occurred
ETH0 and ETH1
• Dark: Ethernet link is down or disabled
• Steady green: 1000-Mbps Ethernet link is up but inactive
Chapter 3: The SmartPath AP (LWN602HA) Overview
SmartPath AP
(LWN602HA)
HiveAP 340
CONSOLE
Console Port
Rollover Cable with
RJ-45 Connectors
RJ-45-to-Female DB-9 Adapter
RJ-45-to-RJ-45 Rollover Cable
RJ-45 Pin RJ-45 Pin
1 8
2 7
3 6
4 5
5 4
6 3
7 2
8 1
— —
724-746-5500 | blackbox.com
COM Port
COM Port
(on Back Panel)
(on back panel)
Management System
Management System
RJ-45-to-Female DB9 Adapter
RJ-45 Pin DB9 Pin
1 8
2 6
3 2
4 5
5 1
6 3
7 4
8 7
— 9
Management System
Signal
CTS (unused)
DSR (unused)
RXD
Ground
Ground
TXD
DTR (unused)
RTS (unused)
RI (Ring Indicator, unused)
Page 33