Black Box LWN602A User Manual page 29

Smartpath enterprise wireless system
Hide thumbs Also See for LWN602A:
Table of Contents

Advertisement

T568A and T568B are two standard wiring termination schemes. Note that the only difference between them is that the white/
green + solid green pair of wires and the white/orange + solid orange pair are reversed.
For straight-through Ethernet cables—using either the T568A or T568B standard—the eight wires terminate at the same pins on
each end.
For cross-over Ethernet cables, the wires terminate at one end according to the T568A standard and at the other according to
T568B.
Chapter 3: The SmartPath AP (LWN602HA) Overview
Figure 3-4. T568A Terminated Ethernet Cable with an RJ-45 connector.
Figure 3-5. T568B Terminated Ethernet Cable with an RJ-45 connector.
724-746-5500 | blackbox.com
Table 3-3. T568A Wire
Color.
Pin
T568A Wire Color
1
White/Green
2
Green
3
White/Orange
1
4
Blue
5
White/Blue
8
6
Orange
7
White/Brown
8
Brown
Table 3-4. T568B Wire
Color.
Pin
T568A Wire Color
1
White/Orange
1
2
Orange
3
White/Green
8
4
Blue
5
White/Blue
6
Green
7
White/Brown
8
Brown
Page 29

Advertisement

Table of Contents
loading

This manual is also suitable for:

Lwn602aeLwn602haLwn602hae

Table of Contents