Black Box LWN602A User Manual page 127

The SmartPath AP Update Results page appears so that you can monitor the progress of the upload procedure. When complete,
"100%" appears in the Upload Rate column and "Successful" appears in the Update Result column.
Check that the VLANs are being applied properly:
In the Upload and Activate Configuration dialog box, click the host name of a SmartPath AP at Branch Office 1, and then select
View Configuration. Notice the VLAN ID that appears in the View Configuration-clusterap_name window that pops up:
user-profile name vlan-id 10
Close the Configuration Details window, and then click the host name of a SmartPath AP at Branch Office 2. The VLAN ID for
the same user profile is 20:
user-profile name vlan-id 20
If you click the host name for a SmartPath AP at Branch Office 3, you can see that its VLAN ID is 30:
user-profile name vlan-id 30
Make sure that all the SmartPath APs in the list at the bottom of Upload and Activate Configuration page are selected, and then
click Upload.
Chapter 9: Common Configuration Examples
724-746-5500 | blackbox.com
Page 127