Black Box LWN602A User Manual page 64

Chapter 7: Using SmartPath EMS
3. Open a Web browser and enter the IP address of the MGT interface in the address field. For example, if you changed the IP
address to 10.1.1.8, enter this in the address field: https://10.1.1.8.
NOTE: If you ever forget the IP address of the MGT interface and cannot make an HTTPS connection to SmartPath EMS, make a
serial connection to its console port and enter 1 for "Network Settings and Tools" and then 1 again for "View/Set IP/
Netmask/Gateway/DNS Settings." The serial connection settings are explained in "Changing Network Settings" in Section
7.1, Installing and Connecting to the SmartPath EMS GUI.
A login prompt appears.
4. Type the default name (admin) and password (blackbox) in the login fields, and then click Log in.
5. If you have not yet installed a SmartPath EMS license on your SmartPath EMS appliance, a prompt to enter a license key
appears (as shown below). For SmartPath EMS Online, you first enter SmatPath after login. The prompt to enter a
license key appears after you click the SmartPath EMS Online button.
For a physical SmartPath EMS appliance, select Install License Key, copy the license key text string previously supplied by Black Box
in an e-mail message, paste it in the License Key field, and then click Install.
Page 64
Figure 7-4. Login screen.
Figure 7-5. SmartPath EMS license information.
724-746-5500 | blackbox.com