Table of Contents
Advertisement
3. Enter 192.168.2.1 from the Web browser to get into the access point's
configuration tool.
4. Enter the user name and password, then click on the OK button. The Status
and Information screen (see Figure 4-2) appears. You can now configure the
access point from this screen.
4.2 Menu Options
The screen shown in Figure 4-2 lists menu options vertically on the left-hand side.
To get to this screen, enter the user name and password in the Enter Network
Password screen (see Figure 4-1), then click on the OK button. These menu
options (described in Sections 4.2.2 through 4.2.9) enable you to set the access
point's functions. You don't have to set the functions in the order they are
presented here. Just choose the menu option you want to set and go to the
corresponding numbered section.
4.2.1 S
I
TATUS AND
On this screen (see Figure 4-2 and Table 4-1), you can see the general access point
information.
NFORMATION
Figure 4-2. Status and information screen.
CHAPTER 4: Configuration Utility
17
Advertisement
Table of Contents
