Black Box LWN602A User Manual page 39

(side view)
(side view)
With the SmartPath AP upside
4
With the HiveAP 340 upside
down, align its port side with the
down, align its port side with
bottom end of the plate.
the bottom end of the plate.
5
Push the SmartPath AP upward,
Push the HiveAP 340 upward,
inserting the four tabs on the
inserting the four tabs on the
plate into the four slots on the
plate into the four slots on the
SmartPath AP. HiveAP 340.
6
Slide the SmartPath AP toward the
Slide the HiveAP 340 toward the
bottom end of the plate, locking the
bottom end of the plate, locking
tabs inside the slots. the tabs inside the slots.
Attach the antennas and connect the
7
Attach the antennas and connect the
cables to complete the installation.
cables to complete the installation.
Figure 3-13. Attaching the SmartPath AP to the mounting plate and connecting cables.
When done, adjust the ceiling tiles back into their former position.
Locking the SmartPath AP (LWN602HA)
To lock the SmartPath AP to the mounting plate, use either a Kensington lock or the lock adapter that is included with the
mounting kit and a small padlock (not included).
To use a Kensington lock, loop the cable attached to the lock around a secure object, insert the T-bar component of the lock into
the device lock slot on the SmartPath AP, and then turn the key to engage the lock mechanism.
To use the lock adapter:
1. Insert the T-shaped extension on the adapter into the device lock slot, and rotate it clockwise so that the curved section
extends through the slot in the mounting plate (see Figure 3-14).
Insert a lock
Insert a lock
through the through the
opening.
opening.
2. Link a padlock through the opening in the adapter and engage the lock to secure the SmartPath AP to the mounting plate.
The opening is ⁄ " (0.3 cm) in diameter at its narrowest.
1
8
Chapter 3: The SmartPath AP (LWN602HA) Overview
Mounting Plate
Mounting Plate
SmartPath AP (LWN602HA) shown as transparent for clarity
HiveAP 340 (shown as transparent for clairty)
Tab
Slot
Rotate the
lock adapter
clockwise.
5 GHz (C) )
Figure 3-14. Locking the SmartPath AP to the mounting plate.
724-746-5500 | blackbox.com
Cables pass through the hole in the
Cables pass through the hole in
mounting plate and ceiling.
the mounting plate and ceiling
5 GHz (B) 5 GHz (A)
Tab inside Tab Tab locked in Tab
inside locked in
slot. place.
slot. place.
Ceiling
Ceiling
Mounting Plate
Mounting Plate
HiveAP 340
SmartPath AP
Mounting plate
Page 39