Black Box LWN602A User Manual page 118

Chapter 9: Common Configuration Examples
Key Value and Confirm Value: guest123
Enable Captive Web Portal: (select); CWP-guest1
Self-Registration Access: User Profile: Self-reg-guests(3)
SSID Broadcast Band: 2.4 GHz (11n/b/g)
WLAN Policy
To add the SSID to an existing WLAN policy, click Configuration > WLAN Policies > wlan_policy, enter the following and then click
Save:
In the SSID Profiles section, click Add/Remove SSID Profile, select guest in the Available SSID Profiles list, click the right arrow
( > ) to move the SSID profile to the Selected SSID Profiles list, and then click Apply.
Files and Configuration Upload
To push the files and configuration to the managed SmartPath APs on which you want to provide guest access, click Monitor >
Access Points > SmartPath APs > (select SmartPath APs) > Update > Upload and Activate Configuration, enter the following, and
then click Upload:
Upload and activate configuration: (select)
Upload and activate CWP pages and Server key: (select)
Upload and activate certificate for RADIUS and VPN services: (clear)
Upload and activate employee, guests, and contractor credentials: (clear)
List of all SmartPath APs selected on the Monitor > Access Points > SmartPath APs page: (select)
Because the WLAN policy for the selected SmartPath APs contains an SSID using captive Web portal files, upload and
activate the files required for the captive Web portal to function and also the configuration. SmartPath EMS uploads the
captive web portal files first followed by the configuration.
The SmartPath AP Update Results page appears so that you can monitor the progress of the upload procedure. When complete,
"100%" appears in the Upload Rate column and "Successful" appears in the Update Result column.
NOTE: If a managed SmartPath AP already has the maximum number of captive Web portal directories (8), you must remove at
least one of them before you can add a new one. To see how many directories are already on a SmartPath AP and remove
a directory if necessary, do the following:
1. Click Monitor > Access Points > SmartPath APs > (select a SmartPath AP) > Update > Remove Captive Web Page
Directory > Remove Specific Web Page Directory.
2. Select the checkbox of the directory that you want to remove, and then click Submit.
To test the captive Web portal:
1. Take a wireless client near one of the SmartPath APs, and form an association with the guest SSID, entering guest123 when
prompted for the preshared key.
2. After the client has formed an association, open a Web browser.
The SmartPath AP intercepts the HTTP or HTTPS traffic from your browser to the URL of its home page and redirects it to the
login page (registration.html) on the captive Web portal.
3. Complete the registration form, and then click Submit.
After a successful registration, the "Login Successful" page appears.
Page 118
724-746-5500 | blackbox.com