Commands For Example 3; Commands For Example 4 - Black Box LWN602A User Manual

Chapter 11: Deployment Examples CLI
SmartPath AP-3:
ssid employee
ssid employee security protocol-suite wpa-auto-psk ascii-key N38bu7Adr0n3
interface wifi0.1 ssid employee
cluster cluster1
cluster cluster1 password s1r70ckH07m3s
interface mgt0 cluster cluster1
save config

11.6.3 Commands for Example 3

Enter the following commands to configure the cluster members to support IEEE 802.1X authentication in Example 3 in Section
11.3:
SmartPath AP-1:
aaa radius-server first 10.1.1.10 shared-secret s3cr3741n4bl0X
ssid employee security protocol-suite wpa-auto-8021x
save config
SmartPath AP-2:
aaa radius-server first 10.1.1.10 shared-secret s3cr3741n4bl0X
ssid employee security protocol-suite wpa-auto-8021x
save config
SmartPath AP-3:
aaa radius-server 10.1.1.10 shared-secret s3cr3741n4bl0X
ssid employee security protocol-suite wpa-auto-8021x
save config

11.6.4 Commands for Example 4

Enter the following commands to configure the cluster members to apply QoS to voice, streaming media, and data traffic in
Example 4 in Section 11.4:
SmartPath AP-1:
qos classifier-map oui 00:12:3b qos 6
service mms tcp 1755
service smtp tcp 25
service pop3 tcp 110
qos classifier-map service mms qos 5
qos classifier-map service smtp qos 3
qos classifier-map service pop3 qos 3
qos classifier-profile employee-voice mac
qos classifier-profile employee-voice service
Page 158
724-746-5500 | blackbox.com