Appendix. Country Codes - Black Box LWN602A User Manual

Appendix. Country Codes

When the region code on a SmartPath AP is preset as "world," you must set a country code for the location where you intend to
deploy the SmartPath AP. This code determines the radio channels and power settings that the SmartPath AP can use when
deployed in that country. For SmartPath APs intended for use in the United States, the region code is preset as
"FCC"—for "Federal Communications Commission"—and the country code is preset for the United States. You can see the
region code in the output of the show boot-param command.
To set a country code when the region is "world", enter the following command, in which number is the appropriate country
code number: boot-param country-code number.
NOTE: Be sure to enter the correct country code. An incorrect entry might result in illegal radio operation and cause harmful
interference to other systems.
To apply radio settings for the updated country code, reboot the SmartPath AP by entering the reboot command.
To see a list of the available channels available for the country code that you have set on the SmartPath AP, enter the following
command: show interface { wifi0 | wifi1 } channel. For example, the output for the show interface wifi0 channel command on a
SmartPath AP whose region code is FCC and country code is 840 (United States) shows that Channels 1 through 11 are available.
If a channel does not appear in this list, you cannot configure the radio to use it.
The following list of country codes is provided for your convenience.
Country Country Code
Albania 8
Australia 36
Belarus 112
Bosnia and
Herzergovina 70
Canada 124
Costa Rica 188
Denmark 208
El Salvador 222
France 250
Guatemela 320
Iceland 352
Iraq `368
Jamaica 388
Japan3 (JP1-1) 395
Japan7 (J7) 4007
Table A-1. Countries and country codes.
Country Country Codes
Algeria 12
Austria 40
Belgium 56
Brazil 76
Chile 152
Croatia 191
Dominican
Republic 214
Estonia 233
Georgia 268
Honduras 340
India 356
Ireland 372
Japan 392
Japan4 (JE1) 396
Japan8 (J8) 4008
724-746-5500 | blackbox.com
Appendix: Country Codes
Country Country Code
Argentina 32
Azerbaijan 31
Belize 84
Brunei
Darussalem 96
China 156
Cyprus 196
Ecuador 218
Faroe Islands 234
Germany 276
Hong Kong 344
Indonesia 360
Israel 376
Japan 1 (JP1) 393
Japan5 (JE2) 397
Japan9 (J9) 4009
Country Country Code
Armenia 51
Bahrain 48
Bolivia 68
Bulgaria 100
Colombia 170
Czech Republic 203
Egypt 818
Finland 246
Greece 300
Hungary 348
Iran 364
Italy 380
Japan2 (JP0) 394
Japan6 (JP6) 399
Japan10 (J10) 4010
Page 165