Command Line Interface (Cli) Commands For Examples; Commands For Example 1; Commands For Example 2 - Black Box SmartPath LWN602A User Manual

Chapter 11: Deployment Examples CLI
Step 3: Load the bootstrap config file on SmartPath AP-2 and SmartPath AP-3.
1. Make a serial connection to the console port on SmartPath AP-2 and log in.
2. Upload the bootstrap-cluster1.txt config file from the TFTP server to SmartPath AP-2 as a bootstrap config.
save config tftp://10.1.1.31:bootstrap-cluster1.txt bootstrap
3. Check that the uploaded config file is now the bootstrap config.
show config bootstrap
4. Repeat the procedure to load the bootstrap config on SmartPath AP-3. The bootstrap configs are now in place on all three
SmartPath APs.

11.8 Command Line Interface (CLI) Commands for Examples

This section includes all the CLI commands for configuring the SmartPath APs in the previous examples. The CLI configurations are
presented in their entirety (without explanations) as a convenient reference, and—if you are reading this guide as a PDF—as an
easy way to copy and paste the commands. Simply copy the blocks of text for configuring the SmartPath APs in each example
and paste them at the command prompt.
NOTE: The following sections omit optional commands, such as changing the login name and password, and commands used to
check a configuration.

11.8.1 Commands for Example 1

Enter the following commands to configure the SSID "employee" on the single SmartPath AP in Example 1 in Section 11.1:
ssid employee
ssid employee security protocol-suite wpa-auto-psk ascii-key N38bu7Adr0n3
interface wifi0.1 ssid employee
save config

11.8.2 Commands for Example 2

Enter the following commands to configure three SmartPath APs as members of "cluster1" in Example 2 in Section 11.2:
SmartPath AP-1:
cluster cluster1
cluster cluster1 password s1r70ckH07m3s
interface mgt0 cluster cluster1
save config
SmartPath AP-2:
ssid employee
ssid employee security protocol-suite wpa-auto-psk ascii-key N38bu7Adr0n3
interface wifi0.1 ssid employee
cluster cluster1
cluster cluster1 password s1r70ckH07m3s
interface mgt0 cluster cluster1
save config
Page 186
724-746-5500 | blackbox.com