Efc Trim Switch Malfunction - Flavel Windsor Installation, Maintenance & User Instructions

5.4 TURNING THE PRODUCT OFF IN THE UNLIKELY EVENT OF AN

EFC TRIM SWITCH MALFUNCTION.

a) In the unlikely event of the EFC trim switch malfunctioning (or if lost or bro
ken) after the appliance has been turned on, the fire can be turned off via the
emergency shut off switch on the control panel.
b) To turn the product off, firstly remove the ashpan from the fire.
c) Press and hold the emergency shut off switch until the fire shuts down.
The process may take up to sixty seconds to complete. (see figure 2
below).
d) When the fire has shut down, release the emergency shut off switch.
e) The appliance will now remain in the "off" position until activated by the
EFC trim switch.
Fig. 2
5.5 REPLACING THE BATTERIES - ELECTRONIC FIRE CONTROL MODELS
a) Remove the ashpan cover
b) The battery pack is located on the right hand side side of the burner unit at
the bottom.
c) Carefully remove the pack and remove the batteries.
d) Replace in the reverse order using 6 off 1.5V AA Alkaline Battery. It is
important that only an alkaline battery is used, otherwise premature
battery failure and leakage may result.
Emergency shut off switch
37