Installation Of Fire; Unpacking The Firebox And Silver Sapphire Trim Assembly - Flavel FSSP00MN Installation, Maintenance & User Instructions

Inset “hole in the wall” decorative fuel-effect gas fire
Table of Contents

Advertisement

INSTALLATION OF FIRE

2.1
UNPACKING THE FIREBOX AND SILVER SAPPHIRE TRIM ASSY.
Carefully lift the combustion chamber out of the carton. Remove the loose item
packaging carefully from the pack. Check the contents as listed :-
Packing Check List
Carefully lift the components out of the carton. Remove the loose item packaging
carefully from the pack. Check the contents as listed :-
1 off
Firebox assembly
1 off
Burner tray
1 off
Boxed ceramic fuel-bed set (packed inside firebox, coal or pebble
dependent upon model chosen)
1 off
Installation & User Instruction Manual (Combined)
1 off
Loose Items pack
1 off
Silver Sapphire top section
1 off
Silver Sapphire base section
1 off
L/H Silver Sapphire side cheek
1 off
R/H Silver Sapphire side cheek
1 off
Pair Latex Gloves
1 off
Length of foil tape
2 off
Self adhesive foam strip (1 off short, 1 off long)
PLEASE NOTE : LATEX GLOVES ARE SUPPLIED WITH
THIS PRODUCT TO PREVENT DAMAGE OF THE
DECORATIVE SECTIONS OF THE ASSEMBLY DURING
INSTALLATION. AN ALTERNATIVE SET OF
PROTECTIVE GLOVES SHOULD BE USED BY
INSTALLERS WHO SUFFER FROM SKIN CONDITIONS
CAUSED BY LATEX ALLERGIES
SECTION 2
6

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Silver sapphire seriesFssc00mn

Table of Contents