Assembling The Ceramics And Fuel Bed (Pebble Variants) - Flavel Windsor Installation, Maintenance & User Instructions

3.2 ASSEMBLING THE CERAMICS AND FUEL BED - PEBBLE MODELS
a) Place the fuelbed base centrally on to the fuelbed support and push
fully backwards to the rear face of the fibre boards Make sure that the
fuelbed base is located centrally in the fire box, behind the
retaining tabs as shown below in figure 15.
Fig. 15
b) Position the front row of four large loose pebbles along behind the first
row of pebbles, ensuring that the flame paths as indicated are not
interupted. See figure 16 below.
Fig. 16
Beige pebbles
to be
positioned as
indicated
Position fuel-bed base behind
retaining tabs
20