Table of Contents
Advertisement
3.9
FITTING THE CAST IRON TRIM & FENDER - CONTEMPORARY &
TRADITIONAL MODELS
3.9.1
Fit the 4 off mounting brackets supplied with the fire in the loose items
pack to the rear face of the cast-iron trim as shown below in figure 39.
Fig. 39
3.9.3
Fit the fascia to the firebox by hooking the mounting brackets into the
slots on the firebox as indicated in figure 40
Fig. 40
41
4 off mounting
brackets
Image shows
bottom right hand
slot, further slots
are position on
mounting flange at
opposite side and
top L/H / R/H
mounting flanges
Advertisement
Table of Contents
