Removing The Broil & Bake Elements - Whirlpool Polara GR556LRK Service Manual

REMOVING THE BROIL & BAKE ELEMENTS
WARNING
Electrical Shock Hazard
Disconnect power before servicing.
Replace all parts and panels before
operating.
Failure to do so can result in death or
electrical shock.
NOTE: Sharp edges may be present.
1. Unplug the refrigerated range or discon-
nect the power.
2. Open the oven door and remove the racks
from inside the oven.
3. To remove the broil element:
a) Remove the two screws from the rear
brackets.
Front Bracket Tabs
Broil Element
Rear Bracket Screws
b) Pull the element forward and unhook
the front bracket tabs from the liner
slots, then pull the element wires
through the liner holes, and disconnect
them from the terminals.
Broil Terminal Wires
4. To remove the bake element:
a) Remove the two screws from the ele-
ment bracket.
Bake Bracket Screws
b) Pull the element forward so that you
can access the bake element wires and
disconnect the wires from the termi-
nals.
Bake Terminal Wires
4-12
Bake Element