Removing The Broil Burner Tube And Broil Igniter; Removing The Bake Burner Tube And Bake Igniter - Whirlpool IKEA IEL730C Technical Education

COMPONENT ACCESS
WARNING
Electrical Shock Hazard
Disconnect power before servicing.
Replace all parts and panels before operating.
Failure to do so can result in death or
electrical shock.
Removing the Broil burner tube and
Broil Igniter
1. This should be easier if the oven door is removed.
2. Remove the mounting screws from the ame spreader,
burner tube and igniter assembly (front of oven)
. Lift the burner tube o of the burner orifice.
4. Disconnect the wire connection from the igniter.
. Remove the entire assembly from the oven.
. Remove the two mounting screws from the igniter bracket
with a 5/16" nut driver.
7. Separate the burner tube and igniter
n
3-6 Vesta Gas and Electric Slide-In Ranges
Figure 16
Removing the Bake burner tube and
Bake Igniter
1. This should be easier if the oven door is removed.
2. Remove two mounting screws from the oven bo om/ oor
at the back corners of the oven.
Lift the oven bo om and ame spreader assembly out of
the oven.
4. Remove 2 burner tube mounting screws (one in front and
one at back of oven).
Figure 17
Figure 18