Removing The Oven Temperature Sensors - Whirlpool Polara GR556LRK Service Manual

REMOVING THE OVEN TEMPERATURE SENSORS

WARNING
Electrical Shock Hazard
Disconnect power before servicing.
Replace all parts and panels before
operating.
Failure to do so can result in death or
electrical shock.
NOTE: Sharp edges may be present.
1. Unplug the refrigerated range or discon-
nect the power.
2. Open the oven door and remove the racks
from inside the oven.
3. To remove the top or bottom oven tem-
perature sensor, remove the two screws
from the bracket.
Top Oven
Temp. Sensor
Bottom Oven
Temp. Sensor
4. Pull the refrigerated range away from the
wall so that you can access the rear of the
unit.
5. Remove the two screws from the rear
panel and remove the panel.
Screw
(1 of 2)
6. Disconnect the wire connector for the oven
temperature sensor you are servicing.
Top Oven Temp. Sensor Connector
Bottom Oven Temp. Sensor Connector
7. From inside the oven, pull the oven tem-
perature sensor wire and connector out
of the oven liner and remove the sensor.
Bottom Oven
Temp. Sensor
4-13
Rear Panel