Removing The Oven Door - Whirlpool Polara GR556LRK Service Manual

NOTE: Sharp edges may be present.
1. To remove the oven door, open the door to
its first stop.
2. Grasp the sides of the door, lift it slightly,
and pull the door forward until the hinge
hangers are partially out of the slots in the
chassis. You will have to alternately open
and close the door as you partially remove
it. Do not completely remove the hinge
hangers from the slots, since there will be
spring tension on them.

REMOVING THE OVEN DOOR

Open Door
To First Stop
3. Reposition the angle of the door to its
vertical (closed) position to remove the
spring tension on the hinge hangers, and
then pull the hangers the rest of the way
out of the chassis slots.
Keep Door
Vertical
(Closed)
To reinstall the oven door:
1. Grasp the sides of the door and insert the
hinge hangers into the hinge slots. Lift the
door slightly and push in at the bottom until
the hangers are fully installed in the unit.
NOTE: If the hinge hangers are not seated
properly, the door will not close tightly and
may be off-center. To seat the hinge hang-
ers, keep the door vertical, then lift it
slightly, and push in on the bottom until the
hangers are fully seated.
2. Open and close the oven door to make
sure that it operates and seals properly.
4-20
Hinge Hanger