Removing The Evaporator & Condenser Fan Motor - Whirlpool Polara GR556LRK Service Manual

WARNING
Electrical Shock Hazard
Disconnect power before servicing.
Replace all parts and panels before
operating.
Failure to do so can result in death or
electrical shock.
NOTE: Sharp edges may be present.
1. Unplug the refrigerated range or discon-
nect the power.
2. Remove the cooling module from the unit
(see page 4-26 for the procedure).
3. Remove the metal baffle from the module
(see page 4-28 for the procedure).
4. Remove the two insulation block sections
from the evaporator (see page 4-28 for the
procedure).
5. Remove the ten screws from the top cover
of the evaporator and remove the cover.
Evaporator Cover With 10 Screws
REMOVING THE EVAPORATOR &
CONDENSER FAN MOTOR
6. Remove the four indicated screws from
the evaporator front covers.
7. Remove the air return seal.
8. Remove the five indicated screws from
the evaporator rear covers.
9. Remove the air outlet cover.
Remove Seal
4-30
4 Cover Screws
5 Cover Screws
Air Outlet Cover