Removing The Broil & Bake Elements - Whirlpool RF196LXK Technical & Service Manual

REMOVING THE BROIL & BAKE ELEMENTS
WARNING
ELECTRICAL SHOCK HAZARD
Disconnect power before servicing the range.
Replace all panels before operating range.
Failure to do so can result in death or electri-
cal shock.
CAUTION: When you work on the electric
range, be careful when handling the sheet
metal parts. Sharp edges may be present, and
you can cut yourself if you are not careful.
1. Turn off the electrical supply going to the
range.
2. Open the oven door and remove the racks
from inside the oven.
3. To remove the broil element:
a) Remove the four screws from the front
and rear brackets.
Front Bracket Screws
Rear Bracket Screws
b) Pull the element forward so that you
can access the terminals and discon-
nect the wires. NOTE: The element ter-
minals are at a 90˚ angle to the rear
holes, so be careful when you pull them
through the liner holes.
3-14
Terminals