Removing The Oven Door Gasket - Whirlpool Polara GR556LRK Service Manual

REMOVING THE OVEN DOOR GASKET

WARNING
Electrical Shock Hazard
Disconnect power before servicing.
Replace all parts and panels before
operating.
Failure to do so can result in death or
electrical shock.
NOTE: Sharp edges may be present.
1. Unplug the refrigerated range or discon-
nect the power.
2. Pull the refrigerated range away from the
wall so that you can access the rear of the
unit.
3. Loosen the two oven liner screws so that
the inside of the hex-head skirt is approxi-
mately 1/2" from the chassis.
2 Oven Liner Screws
4. Pull the oven liner forward to loosen the
oven door gasket from the front of the unit.
5. Starting at one end, pull the gasket out of
the liner hole, and remove it from around
the liner and the second hole.
Pull Oven Liner Forward
To Release Gasket
Pull Door Gasket Out Of Hole
And Remove From Liner
REASSEMBLY NOTE: When you install the
ends of the new gasket, use the pointed end of
a pencil to push the ends into the holes. Also
make sure that the gasket is even along the
surface of the door when the door is closed.
Push End Of Gasket
Into Hole With A Pencil
4-24