Electrical Shock Hazard
Disconnect power before servicing.
Replace all parts and panels before
Failure to do so can result in death or
Unplug range or disconnect power.
Open the oven door and remove oven racks
from the inside of oven.
Remove the two front and the two rear
broil element support screws.
REMOVING BROIL ELEMENT
Pull the broil element forward so that
the wire connectors are inside the oven
Disconnect the two wires from the element
terminals of the broil element.
NOTE: When you disconnect the wires, be care-
ful not to allow them to pull back behind the
access holes where you will not be able
to retrieve them without removing the unit
from its mounting location.