Configuring A Third-Party Camera - Polycom RealPresence Group 550 Administrator's Manual

Realpresence group series video conferencing system
Hide thumbs Also See for RealPresence Group 550:
Table of Contents

Advertisement

Administrator's Guide for the Polycom RealPresence Group Series
Setting
Backlight Compensation
White Balance
Brightness
Color Saturation

Configuring a Third-Party Camera

The RealPresence Group Series systems support some third-party cameras. For a list of supported
third-party cameras and their connectors, see the Integrator's Reference Manual for the Polycom
RealPresence Group Series.
If your camera has a breakout cable that allows the video to be connected to the HDCI port, you can use
either of the following two ways to get the serial data to and from the camera:
1 Use the HDCI port:
a On the system's back panel, connect the camera to the HDCI video input port.
b In the web interface, go to Admin Settings > Audio/Video > Video Inputs and configure the
settings.
2 Use the external serial port:
a On the system's back panel, connect the camera to the serial port.
b In the web interface, select Admin Settings > General Settings > Serial Ports.
c For the RS-232 Mode setting, select Camera Control to enable the external serial port.
d Configure the Serial Port Options. Use the following settings:
Setting
Baud Rate
Parity
Data Bits
Polycom, Inc.
Description
Specifies whether to have the camera automatically adjust for a bright
background. Backlight compensation is best used in situations where the
subject appears darker than the background.
Enabling this setting helps to relieve a bright background, which can impact
the tracking performance of the Polycom EagleEye Director.
Specifies whether to use the Auto or Manual setting to adjust neutral colors in
the image. You can also make a selection based on the type of ambient light in
the room. The following settings are based on the type of light:
Indoor (approximately 3200 K)
3680 K
4160 K
4640 K
5120 K
Outdoor (approximately 5600 K)
Provides a slider to adjust how bright the image is.
Provides a slider to adjust how colorful the image is.
Value
9600
None
8
Monitors and Cameras
61

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents