Polycom RealPresence Group 550 Administrator's Manual page 144

Administrator's Guide for the Polycom RealPresence Group Series
Setting Description
Server Address Specifies the IP address or DNS address of the Global Directory Server. You can enter up to
five addresses.
Password Lets you enter the global directory password, if one exists.
To configure the LDAP directory server:
1 In the web interface, go to Admin Settings > Servers > Directory Servers and select the LDAP
Server Type.
2 Configure these settings on the Directory Servers page.
LDAP Setting Description
Server Address Specifies the address of the LDAP directory server. With Automatic Provisioning, this setting
is configured by the server and appears as read only.
Server Port Specifies the port used to connect to the LDAP server. With Automatic Provisioning, this
setting is configured by the server and appears as read only.
Base DN Specifies the top level of the LDAP directory where searches will begin. With Automatic
(Distinguished Provisioning, this setting is configured by the server and appears as read only.
Name)
Multitiered Specifies the top level group of the LDAP directory required to access the hierarchical
Directory structure. With Automatic Provisioning, this setting is configured by the server and appears as
Default Group read only.
DN
Authentication Specifies the protocol used for authentication with the LDAP server: NTLM, BASIC, or
Type Anonymous.
Use SSL Enables SSL for securing data flow to and from the LDAP server.
(Secure Socket
Layer)
Domain Name Specifies the domain name for authentication with the LDAP server.
User Name Specifies the user name for authentication with LDAP server.
Password Specifies the password for authentication with the LDAP server.
To configure the Microsoft Lync Server 2010 or 2013 directory settings:
1 In the web interface, go to Admin Settings > Network > IP > SIP Settings.
2 Configure the SIP settings as described in
Servers.
3 In the web interface, go to Admin Settings > Servers > Directory Servers and select the
Microsoft Lync Server 2010 Service Type.
4 Configure these settings on the Directory Servers page.
Polycom, Inc.
Configure SIP Settings for Integration with Microsoft
Managing the System Remotely
144