Polycom RealPresence Group 550 Administrator's Manual page 177

Administrator's Guide for the Polycom RealPresence Group Series
Location in
Reference Web Interface:
Number Admin Settings >
13 Audio/Video >
Monitors > Monitor
1
Audio/Video >
Monitors > Monitor
2
Note 1: The SDI and HDMI 1(port 11) ports always output the same video.
Note 2: When VisualBoard is enabled, unless you have enabled all three monitors, do not connect monitors to HDMI
2 (port 12) and VGA ports at the same time. Otherwise, only one of them (HDMI 2, by default) can receive video.
14 N/A
15 N/A
16 N/A
17 N/A
18 General Settings >
Serial Ports
Polycom, Inc.
Input/Output
Video output 1/2
USB connectors
Power Input
Power switch
LAN port
Serial interface
Supported
Formats Description
VGA Output for Monitor 1 (VisualBoard
enabled)
Output for Monitor 2 (VisualBoard
disabled)
The VGA output does not include
embedded audio
USB 2.0 USB for Software Update, remote
control battery charging
100-240 VAC Power input
1.5A
Power switch
Ethernet Connectivity for IP calls,
People+Content IP, and the
system's web interface
RS-232 Serial port
System Back Panel Views
177