Presetting The User's Bit - JVC GY-HM790CHU Instructions Manual

Shooting
Using the Internal Time
Code Generator
(continued)
Presetting the Time Code (continued)
Setting Time Code
[MENU] Button
R
Set Button ( )
Cross-
shaped
button
(
[CANCEL] Button
1
Select [Main Menu] B [TC/UB] B [TC Preset] and press
the Set button ( R ). (A Page 88)
The [TC Preset] screen appears.
[TC/UB] Menu Screen
Memo :
● When the [TC GENE.] switch is set to AREGENB, the
parameter is displayed as ARegenerationB and cannot be
selected.
● When [Main Menu] B [TC/UB] B [TCG Source] is set to
AExternalB, the parameter is displayed as AExternalB and
cannot be selected.
2
Set the time code (hour, minute, second, frame).
Use the cross-shaped button (
item to set, then the cross-shaped button (
values.
[TC Preset] Screen
(During drop frame)
50
Downloaded From VideoCamera-Manual.com Manuals
[USER2] Button
JKH I
)
1
H I
) to place the cursor at the
JK ) to change the
Cursor
During non-drop frame
Memo :
● Press the [USER2] button to reset each digit to A0B. The
cursor moves to the time digit (left).
3
Check the values and press the Set button (
● The time code is set and the screen returns to [TC/UB].
● To cancel the setting, press the [CANCEL] button.
4
Press the [MENU] button.
Returns to the normal screen.

Presetting the User's Bit

You can add an 8-digit hexadecimal number as the user's bit
to the recorded image.
[MENU] Button
R
Set Button ( )
Cross-
shaped
button
JKH I
( )
[CANCEL] Button
1
Set [Main Menu] B [TC/UB] B [TCG Source] to
AInternalB. (A Page 88)
2
Select [Main Menu] B [TC/UB] B [UB Preset] and
press the Set button ( R ). (A Page 88)
The [UB Preset] setting screen appears.
[TC/UB] Menu Screen
Memo :
● When the [TC GENE.] switch is set to AREGENB, the
parameter is displayed as ARegenerationB and cannot be
selected.
● When [Main Menu] B[TC/UB] B [TCG Source] is set to
AExternalB, the parameter is displayed as AExternalB and
cannot be selected.
R ).
[USER2] Button
1