Status Screen; Status Screen In Camera Mode - JVC GY-HM790CHU Instructions Manual

Status Screen

Status Screen in Camera
Mode
STATUS 0 Screen
The STATUS 0 screen is not displayed in the AUX mode. (U model)
30/24 fps
A A A
1min
B B 1min
STBY
RES
A
Appears only when a warning is displayed. (A Page 104)
Item
A
Media Status
B
Iris Status Mark
C
Iris F-Number
D
AE Level
E
Gain
F
Shutter
G
White Balance Mode
102
Downloaded From VideoCamera-Manual.com Manuals
M
L
DD
20 min
MAX 123%
K
MIN 45%
J
SKIN AREA
I
S.DTL
H
B -3
G
A<3200K>
F5.6 AE+1 9dB 1/10000
F
B C D E
---- : No card found in the selected slot *
STBY : Recording standby (recording pause)
REC : Recording
REVIEW : Clip Review (A Page 56)
STBYP : Pre Rec recording standby (A Page 58)
RECP : Pre Rec recording (A Page 58)
STBYC : Clip Continuous recording standby
(A Page 59)
* When
[Tally System]
card is not inserted into the slot.
Indicates whether the brightness of the image is appropriate.
J
: Iris set higher than normal
R
: Iris set to normal
K
: Iris set lower than normal
Displays F-number of the lens iris.
This is not displayed for some lens types, and when the lens cable is disconnected.
(OPEN, F2, F2.8, F4, F5.6, F8, F11, F16, CLOSE)
Memo :
● You can specify the type of display and whether to display the information using [F.No/Iris Indicator] of
[Status Display] in the [LCD/VF] menu. (A Page 90)
Appears when the AE function is activated and [AE LEVEL] in the [Camera Function] menu is set to a
value other than ANormalB. (A Page 78)
(AE-3, AE-2, AE-1, AE+1, AE+2, AE+3)
Displays the gain value when it is not A0dBB.
(3dB, 6dB, 9dB, 12dB, 15dB, 18dB, ALC)
Displays the current shutter speed when [Shutter] in the [Camera Function] menu is set to [Step]/
[Variable] and the shutter is ON. (A Page 78)
: Displayed when [Shutter] is set to AEEIB (auto adjustment mode).
EEI
FAS : Displayed when shutter or gain is set to the auto adjustment mode.
Memo :
● The variable range of the shutter speed varies according to the video format settings. (A Page 41)
Displays the current white balance mode.
A<**00K>, B<**00K>, P<**00K> (A**00B indicates color temperature)
FAW : When the Fulltime Auto White balance mode is ON
MANU : Manual White Balance mode (only during control using the Remote Control Unit)
Appears only when connected to an external device.
Description
RECC
STBYC (displayed in yellow)
STOP
POFF
in the menu is set to
[Others]
Page 94)
(A
: Clip Continuous recording (A Page 59)
: Clip Continuous recording pause
(A Page 59)
: Unable to record to the card in the slot
: Power OFF
A A
StudioB, ----B is not displayed even when a