Side Control Panel - JVC GY-HM790CHU Instructions Manual

Introduction
Names of Parts (continued)

Side Control Panel

A
B
C
D
E
F
G
H
I
J
A
[VF BRIGHT] Viewfinder Luminance Adjustment Knob
(A Page 29)
B
[VF PEAKING] Contour Adjustment Knob (A Page 29)
Memo :
● This knob does not function when Focus Assist is activated.
(A Page 37)
C
[FOCUS ASSIST] Focus Assist Button
Press this button during shooting to display the focus area in
either blue, red, or green. This enables easy and accurate
focusing. (A Page 37)
D
[USER1], [USER2], [USER3] User Buttons (A Page 79)
Use these buttons to switch shooting conditions according to
the object. The functions change as below according to the
operation mode (A Page 8).
During Camera mode
(Except AUX mode)
● Activates the function assigned to
[USER1]
Button [USER1] in the menu.
● Loads the [TC Preset] screen
when pressed together with the
[MENU] button. (A Page 51)
● Activates the function assigned to
[USER2]
Button [USER2] in the menu.
● Resets settings on the [TC Preset]/
[UB Preset] screen when pressed.
(A Page 51, 52)
● Activates the function assigned to
[USER3]
Button [USER3] in the menu.
12
Downloaded From VideoCamera-Manual.com Manuals
Memo :
● Set the functions of the [USER1,USER2,USER3] buttons in
● When the menu screen is displayed, these buttons function
E
F
G
● Press the [STATUS] button to display the status screen on
P
O
● Switches between [Main Menu] and [Favorites Menu] when
N
M
H
I
L
You can select one of the three white balance types.
K
J
Turns ON/OFF the power.
When the power is OFF, APOFFB appears on the LCD
monitor and viewfinder.
Wait for 5 seconds or more to turn on the power again.
K
Starts/stops recording.
The [REC] trigger button (A Page 11) Z on top and the
[REC] trigger button (A Page 16) of the lens are interlocked
with this button.
Memo :
● When [1394 Rec Trigger] in the [Others] menu is set to
L
Recording Level Adjustment Knob/Auto Indicator
(A Page 46)
M
During Media mode
Cancels various settings and stops playback.
Adds/deletes OK
mark.
N
(A Page 68)
The function changes according to the operation status of
the camera recorder.
Deletes clips
(A Page 66)
^
Shutter operation:
the menu. (A Page 79)
as the menu operation buttons.
(A Page 70 [Operation Buttons])
[MENU] Menu Button (A Page 70)
[ND FILTER] ND Filter Switch (A Page 45)
[STATUS] Status Screen Display Button
the viewfinder and LCD monitor during normal screen
display (when the menu screen is not displayed).
(A Page 18 [Status Screen])
the [STATUS] button is pressed while the menu screen is
displayed. (A Page 70)
[GAIN] Sensitivity Selection Switch (A Page 40)
[WHT.BAL.] White Balance Selection Switch (A Page 42)
[POWER] Power ON/OFF Switch
[REC] Rec Trigger Button (Recording Start/Stop)
ASplitB, this button becomes the recording start/stop button
of the external equipment. (A Page 94)
(A Page 124 [Backup Recording])
[AUDIO LEVEL CH-1/CH-2]/[AUTO] CH-1/CH-2
[CANCEL] Cancel Button
Cross-Shaped Button ( JKH I
During menu operation (all modes) (A Page 70)
R
Center Set button ( ) : Confirms menu items and setting
values
JK
Cross-Shaped Button ( ) : Selects menu items and setting
values
During Camera mode (Except AUX mode)
R
Center Set button ( ) : Shutter ON/OFF
Cross-Shaped Button ( JK ) : Switches shutter speed when shutter
is ON
AE level operation : Cross-shaped button (
)/Set Button ( R )
H I
)