JVC GY-HM790CHU Instructions Manual page 98

Menu Display and Detailed Settings
Others Menu (continued)
* Default values are indicated in bold characters.
Item
Tally System
Front Tally
Back Tally
1394 Rec Trigger
1394 Auto Power
Off
Mode LED
94
Downloaded From VideoCamera-Manual.com Manuals
Setting Values
Studio For setting the display conditions of the camera recorder's tally lamps (front/back).
Studio : Displays according to the TALLY IN/PREVIEW IN signals from an external device,
Ext
Int
Ext
Int
For specifying the illumination settings of the camera recorder's front tally lamp during
recording.
On
On
Blink
Blink
Off
Off
For specifying the illumination settings of the camera recorder's back tally lamp during
recording.
On
On
Blink
Blink
Off
Off
Ext For setting the recording trigger for the external recording device connected to the
[IEEE1394] terminal.
Series
Ext
Split
Series
Synchronize
Off
Split
Synchronize : Outputs recording trigger simultaneously to the internal and external
Off
Memo :
● This item is selectable only in Camera mode. It cannot be set when recording is in
progress on the camera recorder or an external device.
● When the external recording device connected to the [IEEE1394] terminal switches to the
recording mode according to the settings, switching of operation mode using the
[CAM/MEDIA] button and the Clip Review function will be disabled.
● When [1394 Rec Trigger] is set to ASplitB, the [REC] button on the side of the camera
recorder becomes a Rec Start/Stop button for the external device. (A Page 12)
● When the [REC] button is pushed immediately after the power is turned on or after a
menu setting is changed, recording with the external device might start about 10 seconds
late.
Enable For setting whether to automatically turn off the power of the external recording device
connected to the [IEEE1394] terminal when the [POWER] switch of the camera recorder is
Disable
turned off.
Enable : Turns off the power automatically.
Disable : Disables this function.
Memo :
● The IEEE1394 control is only valid for external devices with a POWER OFF button.
On For specifying the illumination settings of the operation mode indicator on the side control
panel of the camera recorder.
Off
On
Off
such as a Remote Control Unit.
: Displays mainly the status of external devices.
: Displays mainly the status of the camera recorder.
: Lights up only during recording.
: Blinks after the [REC] trigger button is pressed until recording starts, and lights up
during recording.
: Turns off the tally lamp.
: Lights up only during recording.
: Blinks after the [REC] trigger button is pressed until recording starts, and lights up
during recording.
: Turns off the tally lamp.
: Outputs recording trigger to the external system only. (Recording is not
performed by the internal system.)
: Outputs recording trigger to enable consecutive recording by the internal
and external systems.
: Outputs separate recording triggers to the internal and external systems.
systems.
: Recording trigger is not output to the external system.
: Lights up as below according to the operation mode. (A Page 8)
: Turns off the indicator.
Operation Mode
Camera Mode
Media Mode (SD Card Mode)
Media Mode (IEEE1394 Mode)
USB Mode
Function
Color
Blue/Purple
Green
Orange
Orange