Assigning Functions To User Buttons - JVC GY-HM790CHU Instructions Manual

Note :
● During Clip Review, only the [CANCEL] and [REC]
buttons are enabled. Press the [CANCEL] button to
cancel clip review and return to ASTBYB (recording
standby) mode. Press the [REC] button to cancel clip
review and enter recording mode. It will take some time to
start recording after the button is pressed.
● When the last clip is less than 5 seconds, the whole clip is
played back.
● Only video clips in the currently selected slot can be
reviewed.
● When there are no clips in the selected slot, Clip Review
function is disabled.
● Clip Review is unavailable when Clip Continuous Rec is
paused (STBYC, yellow text). To operate Clip Review,
use the [CANCEL] button to set to ASTBYCB (white text)
first. (A Page 59)
● Clip Review is unavailable when the camera recorder is
connected to an external equipment and the equipment is
in recording state.
Downloaded From VideoCamera-Manual.com Manuals
Assigning Functions to
User Buttons
You can assign functions to the [USER1], [USER2], and
[USER3] buttons.
By assigning functions to the [USER1], [USER2], and
[USER3] buttons, the usability of the camera recorder is
enhanced.
[USER1], [USER2], [USER3]
Buttons
1
Assign functions to the [USER1], [USER2], and
[USER3] buttons from the menu. (A Page 79)
Set each of the [USER1], [USER2], and [USER3] items in
the [Main Menu] B [Camera Function] B [Switch Set] menu.
Memo :
● Operations of the [USER1], [USER2], and [USER3]
buttons are interlocked with the menu settings.
● When the menu screen is displayed, these buttons
function as the menu operation buttons.
(A Page 70 [Basic Operations in Menu Screen])
57