Setting Time Code Without Opening The Menu - JVC GY-HM790CHU Instructions Manual

3
Use the cross-shaped button (
at the item to set, then use the cross-shaped button (
to change the values.
Numbers between 0 and 9 or alphabets between A and F
can be specified for the user's bit.
[UB Preset] Screen
Memo :
● Press the [USER2] button to reset each digit to A0B. The
cursor moves to the left.
4
Check the values and press the Set button (
● The time code is set and the screen returns to [TC/UB].
● To cancel the setting, press the [CANCEL] button.
5
Press the [MENU] button.
Returns to the normal screen.
Setting Time Code Without Opening the
Menu
[MENU] Button
R
Set Button ( )
Cross-
shaped
button
(
[CANCEL] Button
Memo :
● Settings cannot be made in the following cases.
● [TCG Source] in the [TC/UB] menu is set to AExternalB.
● [TC GENE.] switch is set to AREGENB.
● Menu screen is displayed.
● The camera recorder is not in the Camera mode.
(Except AUX Mode)
Required Settings Before Preset
(A Page 49)
● Set [TCG Source] in the [TC/UB] menu to AInternalB.
● Set the [TC DISPLAY] switch to ATCB.
● Set the [TC GENE.] switch to settings other than
AREGENB.
Downloaded From VideoCamera-Manual.com Manuals
H I
) to place the cursor
Cursor
R
[USER1] Button
[USER2] Button
JKH I
)
Setting Time Code
JK
)
1
Hold down the [MENU] button and press the [USER1]
button.
The [TC Preset] setting screen appears.
2
Set the time code (hour, minute, second, frame).
Use the cross-shaped button (
item to set, then the cross-shaped button (
values.
).
Memo :
● Press the [USER2] button to reset each digit to A0B. The
cursor moves to the time digit (left).
3
Check the values and press the Set button (
● The time code is set and the screen returns to the normal
screen.
● To cancel the setting, press the [CANCEL] button.
Note :
● Editing will be canceled and the screen will close under the
following situations.
● The [TC DISPLAY] switch is selected during editing.
● The camera recorder is switched to the Media mode.
● When editing time code, operations of the [USER1],
[USER2], [USER3] buttons that are set in the [Main Menu] B
[Camera Function] B [Switch Set] menu are disabled.
[USER2] functions as the number reset button. (A Page 79)
[TC Preset] Screen
(During drop frame)
H I ) to place the cursor at the
Cursor
JK
) to change the
R ).
51