Presetting The User's Bit - JVC GY-HM750CHU Instructions Manual

Shooting
Time Code Generator
Settings (continued)
Presetting the Time Code (continued)
Setting Time Code
[MENU] Button
R
Set Button ( )
Cross-
shaped
Button
JKH I
(
[CANCEL] Button
1
Select [Main Menu] B [TC/UB] B [TC Preset] and
R
press the Set button ( ). (A Page 88)
The [TC Preset] screen appears.
[TC/UB] Menu Screen
Memo :
● When the [TC GENE.] switch is set to REGEN , the
parameter is displayed as Regeneration and cannot be
selected.
2
Set the time code (hour, minute, second, frame).
Use the cross-shaped button (
item to set, then the cross-shaped button (
values.
[TC Preset] Screen
(During drop frame)
[USER2] Button
)
1
H I
) to place the cursor at the
JK ) to change the
Cursor
During non-drop frame
Memo :
● Press the [USER2] button to reset each digit to 0 . The
cursor moves to the time digit (left).
3
Check the values and press the Set button (
● The time code is set and the screen returns to [TC/UB].
● To cancel the setting, press the [CANCEL] button.
4
Press the [MENU] button.
Returns to the normal screen.

Presetting the User's Bit

You can add an 8-digit hexadecimal number as the user's bit
to the recorded image.
[MENU] Button
R
Set Button ( )
Cross-
shaped
Button
JKH I
(
[CANCEL] Button
1
Select [Main Menu] B [TC/UB] B [UB Preset] and
press the Set button ( R ). (A Page 88)
The [UB Preset] setting screen appears.
[TC/UB] Menu Screen
Memo :
● When the [TC GENE.] switch is set to REGEN , the
parameter is displayed as Regeneration and cannot be
selected.
R ).
[USER2] Button
)
1