JVC GY-HM790CHU Instructions Manual page 115

Item
C
Time Code Generator
D
Media Status
E
Remaining Space on
Media
F
OK Mark
G
Video Format
H
Voltage/
Battery Power
I
Operation of External
Device
J
Time Code (TC)/
User's Bit (UB)
Memo :
● During enlarged display of the status on the LCD monitor screen, the video image remains displayed on the viewfinder.
Downloaded From VideoCamera-Manual.com Manuals
Displays the operation mode of the time code. (Display: [FREE], [RECR], [REGN], [EXT], [EXT L]) (A Page 48)
This item appears as AEXTB when [TCG Source] in the [TC/UB] menu is set to AExternalB.
L indicates the synchronizing status of the built-in time code generator with respect to the time code that is
input to the [TC IN] terminal.
Lights up : During synchronization with the external time code.
Light goes out : When the signal is not synchronized, or when there is no time code input.
Displays the SDHC card status in characters and symbols.
---- : No card found in the selected slot
STBY : Recording standby (recording pause)
REC : Recording
REVIEW : Clip Review (A Page 56)
STBYP : Pre Rec recording standby (A Page 58)
RECP : Pre Rec recording (A Page 58)
STBYC : Clip Continuous recording standby
(A Page 59)
Displays the remaining recording time on the SDHC card. The currently active slot is indicated using an
enlarged card icon with black characters and a white background. A key mark appears when the write-protect
switch of the SDHC card is set.
Appears as [OK] when the currently played clip is appended with an OK mark.
Displays the video format that is set. (A Page 38)
Memo :
● Displayed as A60i AUXB in the external input recording mode. (U model)
Displays the current status of the power supply in use.
Display
Currently powered by an AC adapter. The current voltage is shown on the right.
12.3V
If the supplied voltage from the AC adapter is low, the voltage value will be displayed in
red as a warning.
Currently powered by a battery.
12.3V
When the battery power runs out, the battery mark appears hollow, and ARESB is displayed.
200min
Memo :
● The display on the right can be set using [Battery Info] of [Status Display] in the
30%
[LCD/VF] menu. (A Page 91)
RES
Displays the operating status of the connected external device.
For details, refer to the instruction manual of the corresponding external device.
Displays the time code (hour : minute : second : frame) or user's bit data.
0 0 : 0 0 : 0 0 : 0 0
Colon (:) for non-drop frames
Dot (.) for drop frames
Description
RECC : Clip Continuous recording (A Page 59)
STBYC (displayed in yellow)
: Clip Continuous recording pause
(A Page 59)
STOP : Unable to record to the card in the slot
POFF : Power OFF
Description
111