Loading A Setup File; Resetting Setup Files - JVC GY-HM790CHU Instructions Manual

Memo :
● If you do not want to save the file, select [Cancel] or press
the [CANCEL] button to return to the previous screen.
● When saving of a file fails, a AStore Error!B message
(indicated in red frame) appears for several seconds, after
which the previous screen is displayed.
8
Saving is complete.
After saving of the file is complete, ACompleteB appears on
the screen, and the menu screen closes automatically.

Loading a Setup File

1
Display the [Setup File Manage] menu.
Select the [Setup File Manage] menu on the [Main Menu]
screen, and press the Set button (
2
Select [Load File] and press the Set button (
3
Select [Scene File] or [Picture File], and press the Set
R
button ( ).
The existing files are displayed.
4
Select the file to load using the cross-shaped
button ( JK ), and press the Set button (
[Load File] Menu Screen
Memo :
● When the write-protect switch of the inserted SDHC card
is set, a mark appears beside the SDHC card icon.
Setup files can be loaded from an SDHC card even if the
write-protect switch is set.
● A
mark is displayed at the right end when there are
some settings that are not supported by the setup file
(e.g., picture files saved using the GY-HM700 series).
These files can be loaded by this camera recorder, but
some of the settings will not be compatible. (A Page 119)
● Setup files that are completely incompatible will not be
displayed. (A Page 119)
Downloaded From VideoCamera-Manual.com Manuals
7
R
). (A Page 97)
R ).
R ).
Cursor
5
Select [Load] on the confirmation screen, and press
R
the Set button ( ).
Loading starts, and ALoading...B appears on the screen.
Memo :
● If you do not want to load the file, select [Cancel] or press
the [CANCEL] button to return to the previous screen.
● When loading of a file fails, a ALoad Error!B message
(indicated in red frame) appears for several seconds, after
which the previous screen is displayed.
6
Loading is complete.
After loading of the file is complete, ACompleteB appears on
the screen, and the menu screen closes automatically.

Resetting Setup Files

1
Display the [Setup File Manage] menu.
Select the [Setup File Manage] menu on the [Main Menu]
screen, and press the Set button (
2
Select [Reset File] and press the Set button (
3
Select [Scene File] or [Picture File], and press the Set
R
button ( ).
The existing files are displayed.
4
Select the file to delete using the cross-shaped
button ( JK ), and press the Set button (
Memo :
● Scene files and preset scene files stored inside the SDHC
card cannot be selected or reset.
5
Select [Reset] on the confirmation screen, and press
the Set button ( R ).
Deletion starts, and AResetting...B appears on the screen.
Memo :
● If you do not want to reset the file, select [Cancel] or press
the [CANCEL] button to return to the previous screen.
6
Resetting is complete.
After resetting of the file is complete, ACompleteB appears on
the screen, and the menu screen closes automatically.
5
R
). (A Page 97)
R ).
R ).
121