Setting The Clock (Initial Setting) - JVC GY-HM790CHU Instructions Manual

Preparations
Setting the Clock
(Initial Setting)
Set the date/time of the built-in clock in the [Initial Setting]
screen. The configured date/time data is saved in the
built-in rechargeable battery even if the power is turned off.
Setting the Clock in the [Initial Setting]
Screen
The [Initial Setting] screen appears when the power is turned
on for the first time and when the built-in battery is turned on
again after being fully discharged.
All operations are disabled until initial settings are complete.
1
Set the [POWER] switch to AONB.
The [Initial Setting] screen appears.
For GY-HM790CHU/GY-HM790U
For GY-HM790CHE/GY-HM790E
26
Downloaded From VideoCamera-Manual.com Manuals
[MENU] Button
Cross-Shaped
Button
JKH I
( )
Set Button
R
( )
[POWER] Switch
2
Specify [Time Zone] and [Date/Time].
A
Move the cursor with the cross-shaped button (
select the setting item.
B
Change the values with the cross-shaped button (
3
Press the Set button after setting is complete.
The clock is set to 0 seconds of the input date/time.
Memo :
● The configured date/time data can be displayed on the LCD
monitor and viewfinder and be recorded to the SDHC card.
● The value of the year can be set in the range of A2000B to
A2099B.
Changing the Time after Initial Setting
Setting the date/time (A Page 95)
1
Select [Others] menu B [Date/Time].
The [Date/Time] setting screen appears.
2
Set the date and time.
A
Move the cursor with the cross-shaped button (
select the setting item.
B
Change the values with the cross-shaped button (
3
R
Press the Set button (
The clock is set to 0 seconds of the input date/time.
H I ) and
JK
H I ) and
JK
) after setting is complete.
).
).