Switch Set Item - JVC GY-HM790CHU Instructions Manual

Switch Set Item

* Default values are indicated in bold characters.
Item
FAW
GAIN L
GAIN M
GAIN H
USER1
USER2
USER3
LENS RET
Clip Review
Downloaded From VideoCamera-Manual.com Manuals
Setting Values
None For assigning the FAW (Fulltime Auto White Balance) function to a position on the [WHT.BAL.]
selection switch.
PRESET
This is fixed at AFAWB when the [FULL AUTO] switch of the camera recorder is set to AONB.
A
None
B
PRESET
A
B
ALC, 18dB, 15dB, For setting the gain value of each position on the [GAIN] selection switch.
This is fixed at AALCB when the [FULL AUTO] switch of the camera recorder is set to AONB.
12dB, 9dB, 6dB, 3dB,
0dB
(Default values GAIN L: 0dB, GAIN M: 9dB, GAIN H: 18dB)
By assigning one of the following functions to each of the [USER1]/[USER2]/[USER3] buttons, these buttons can be
used to control the assigned function (on/off, start, switch).
Set according to the shooting conditions. Functions can be assigned only in Camera mode (except AUX mode).
(Default values USER1: Bars, USER2: B.Stretch3, USER3: Load File)
Setting Values
None No function is assigned.
Bars Assigns the function of [Bars] in the [Camera Function] menu. (A Page 78)
Load File Assigns the function of [Load File] in the [Setup File Manage] menu. (A Page 97)
Clip Review Assigns the Clip Review function. (A Page 56)
B.Stretch1 Assigns the functions of [Stretch Level] and [Compress Level] under [Black Toe] in the
[Camera Process] menu. (A Page 82)
B.Stretch2
B.Stretch3
B.Stretch4
B.Stretch5
B.Compress1
B.Compress2
B.Compress3
B.Compress4
B.Compress5
Clip Review For assigning a function to the [RET] button on the lens. This function does not work if the [RET]
button is not available on the lens in use.
OK Mark
Clip Review
Focus Assist
OK Mark
Return
Focus Assist : Assigns the Focus Assist function to the [RET] button. (A Page 37)
Return
For specifying the operation when [LENS RET] is set to AClip ReviewB.
Last 5 sec
Last 5 sec
Top 5 sec
Top 5 sec
CLIP
CLIP
Memo :
● Selectable when [LENS RET] is set to AClip ReviewB, or when any of the [USER1]/[USER2]/
[USER3] buttons is set to AClip ReviewB.
Function
: FAW function is not assigned.
: Assigns FAW to the PRESET position.
: Assigns FAW to the A position.
: Assigns FAW to the B position.
Description
: Assigns the Clip Review function to the [RET] button. (A Page 56)
: Assigns the OK mark function to the [RET] button. This function operates during
shooting. (A Page 58)
: Assigns the return video display function to the [RET] button. (A Page 128)
: Views about 5 seconds of the clip from the ending.
: Views about 5 seconds of the clip from the beginning.
: Views the entire clip.
79