JVC GY-HM790CHU Instructions Manual page 131

Phase Items to Synchronize
The phase items to be synchronized may vary depending on
the input synchronizing signal and output video signal. (See
table below)
Output Video
Terminal
Signal
VIDEO Composite
SD Component
HD Component
Y/PB/PR 720p
HD Component
1080i
SD-SDI
HD/SD-SDI HD-SDI 720p
HD-SDI 1080i
H : Horizontal phase
V : Vertical phase
Adjusting the H Phase
1
Select [Genlock Adjust] in the [Others] menu. (A Page 96)
2
Select the phase item to adjust in [Genlock Adjust].
Analog SD H Phase
Analog HD H Phase
SD-SDI H Phase
HD-SDI H Phase
3
Select a value using the cross-shaped button (
The H phase of the camera recorder's video signals is
adjusted with respect to the external synchronizing signal
input to the [GENLOCK INPUT] terminal.
You can alter the setting value for [Analog HD H Phase], [SD-
SDI H Phase], and [HD-SDI H Phase] in increments of 10 by
pressing down the cross-shaped button (
or longer.
Memo :
● Adjustment cannot be performed when recording or
playback is in progress.
● The video image may be disrupted momentarily during
adjustment. This is not a malfunction.
Downloaded From VideoCamera-Manual.com Manuals
Input Sync Signal
BB
720p
H, V, F V
H, V, F V
V H, V
V, F V
H, V, F V
V H, V
V, F V
F : Field phase
: For adjusting the H phase of SD analog
signal.
: For adjusting the H phase of HD analog
signal.
:
For adjusting the H phase of SD-SDI
signal.
: For adjusting the H phase of HD-SDI
signal.
JK ) for 2 seconds
Tri-sync
1080i
V, F
V, F
V
H, V, F
V, F
V
H, V, F
JK
).
127