Precor P30 Operating And Maintaining page 31

Setting Up the Console
Product Value
AMT -
Newer
Models
Only
All
All
All
All
All
AMT
All
All
All
BELT USAGE
HOUR METER
UPPER BOOT SW
PART NUMBER
UPPER BASE SW
PART NUMBER
LOWER BASE SW
PART NUMBER
METRICS BOARD Software number on the Metrics
STRIDE DIAL SW
PART NUMBER
SERIAL NUMBER
USAGE LOG
EVENT LOG
Information provided
Belt Stride Count: Tracks the
•
number of strides on equipment.
Stride Count Reset: Reset
•
increases by one each time a
reset is performed.
Odometer at Last Reset: Records
•
the odometer reading at the time
the belt was changed. The
equipment odometer continues to
count forward after the belt
change.
Displays the number of hours that
•
the equipment has been in use.
The equipment tracks the elapsed
•
minutes, but the value that
appears is truncated to the
nearest full hour.
Upper board application software
part number and version
Upper base application software
version
Lower application software version
Board
Stride Dial software number
Used to determine exact model and
type of equipment
The number of times each
•
program has been used and
displays the associated
cumulative minutes.
Helpful in determining user
•
preferences in program selection.
Displays any event codes that may
have been detected by the software.
For more information, refer to Event
Log.
29