Connecting Cables (P30 And P10) - Precor P30 Operating And Maintaining

52
5. Pull all cables upward and forward until you can drape

Connecting Cables (P30 and P10)

Important: Pass all cables through the semicircular opening just
above the console mount, as shown in the following figure. Do not
attempt to route any cables through other openings or through the
steel channel above the mount.
Figure 33: Cable routing from the mount into the console
Assembling and Maintaining AMT 800-Series Adaptive Motion Trainers
them over the top of the console's back plate.
Figure 32: Cable positioning