Page 1
Setting Up the Personal Viewing System (PVS) North American and Pro:Idiom Versions Equati on 1: E nglis h...
Page 2
All rights, title, and interests in and to the software of the Preva Business Suite, the accompanying printed materials, any copies of such software, and all data collected via the Preva Business Suite, are exclusively owned by Precor or its suppliers, as the case may be.
Page 3
Keypad Orientation Important The information provided in this section is intended for system administrators and registered service technicians. Please do not share it with equipment users or non-administrative staff. Use the System Setting mode to configure equipment settings in ways that benefit your users and your facility. Changes made to these settings are stored in the equipment, allowing them to persist after a loss of power.
Page 4
Main Menu Access The Main Menu categories are: • Channel • Picture • Audio • Time • Setup Grayed out settings are not available. To view the Main Menu: Press Power On/Off to turn on the PVS. Press CC + Volume Up + Channel Down. Note If you do not press a button within 30 seconds (default), the PVS screen returns to the normal viewing mode.
Page 5
• Digital Strength Input Note Precor recommends using Auto Scan to ensure channel selection is complete. Default: Cable + Air Auto Scan Auto Scan searches the selected ATV and/or DTV signals and saves the discovered channels to the current channel list.
Page 6
View the Picture Menu Settings This menu contains the following presets: • Picture Mode Color Mode • Aspect Ratio • Table 1: Picture Menu Setting Values Default Picture Mode Standard, Dynamic, Personal, Soft Standard Color Mode Normal, Warm, Cool Normal Aspect Ration 4:3, 16:9 Selected by PVS...
Page 7
View the Setup Menu Settings This menu contains the following presets: • Menu Language OSD Time Out • • Closed Caption Restore Default • • Headphone Detect USB Update • • Software Version Grayed out settings are not available. Table 2. Picture Menu Setting Value Default...
Need help?
Do you have a question about the P31 and is the answer not in the manual?
Questions and answers