Precor P30 Getting Started Manual

The P30 Console offers a streamlined console with an advanced LED display, basic electronic readouts, and a mobile device charger.

Activate the console for self-powered equipment

Precor equipment is either self-powered or externally powered using an optional power adapter.
To activate self-powered equipment, begin exercising.

Optional use of the power adapter

An optional AC power adapter provides sustained power to the equipment. To purchase the
power adapter, contact your sales representative.

System settings

Use the System mode to configure settings in ways that benefit
your users and your facility. For detailed information on system
settings, view the product information at www.precor.com.
Note The information provided in this section is intended for
system administrators and Precor service technicians. DO NOT
share it with exercisers or non-administrative staff.

To view the Club Parameters settings:

1. Press Pause.
2. Enter the password: 5 6 5 1 5 6 5.
3. Press OK. The Set Club Parameters banner appears.
4. Scroll through the club parameters using the following key:
Key Function
Navigate the Settings menu
OK Selects a menu setting
Back Returns to previous menu level
Pause Returns to the Welcome banner
For complete console operating instructions and troubleshooting, visit us at www.precor.com.
Make sure your trainers regularly read our blog (select languages) at www.precor.com for more ideas
about fitness routines and advice from trusted industry experts.
P30 Console Getting Started | P/N 305039-101 rev B, ENU
©2017 Precor Incorporated | April 2017

P30 CONSOLE

GETTING STARTED GUIDE
Information Display settings provide information
including an event log, software and equipment serial
numbers, and usage information.

To view the Informational settings:

1. Press Pause.
2. Enter the password: 6 5.
3. Press Enter. The settings appear.
4. Scroll through the informational settings.